KZYEE KS11 Brake Fluid Analyzer Professional Brake Fluid Tester Digital Brake Fluids Analyzer

 

Detect the brake fluid performance quickly by measuring the water content of the brake fluid, in order to replace the brake fluid timely.

 

This instrument applies to DOT3, DOT4 and DOT5.1 these three types of brake fluid testing, using the AC pulse testing method, greatly to reduce the polarization phenomenon during the brake fluid testing, the test result is accurate and the measuring speed is fast.

 

This instrument is equipped with digital tube digital display, sound and light alarm combining LED lights and buzzer, automatic power off function to save power, it is intuitive and easy to understand, convenient to carry.

Battery type and replacement
This instrument uses a 9V layer-built battery to provide power, a battery need to be installed before using. When assembling the battery, open the battery cover at the back of the instrument, fasten the 9V layer-built battery to the battery buckle of the instrument, and then cover with the battery cover.
If the battery power is insufficient, the green LED light will twinkle after starting up, indicating to replace the battery, the method of battery replacement is the same as the battery assembling, remove the old battery and then replace a new battery.


How to Use KZYEE KS11 Brake Fluid Analyzer:

Press the on-off key to start up, the instrument will self-test after starting up, all LED indicators on, and then the DOT3 light on, the first indicator (green) on, the digital tube displays 0.00%, this shows that the instrument is normal.
The instrument default select the type of DOT3 brake fluid after starting up, if you need to select other brake fluid types, please short press on-off key to select the desired type of brake fluid.

After selecting the type of the brake fluid, insert the probe into the brake fluid and do not against the cup wall or the cup bottom of the brake fluid, shaking the test probe, and then wait for calm, the digital tube will display the water content of the brake fluid and the indicator light will indicates the brake fluid quality.
 

 

Green LED (＜1%) ON: The brake fluid performance is excellent

Yellow LED(＞1.5%) ON: The brake fluid performance is fine

Yellow LED(＞2.5%) ON: The brake fluid performance is OK, but it need to be detected and observed in the near future

Red LED(＞3%) ON: The brake fluid performance is poor, it need to be replaced

Red LED(＞4%) ON: The brake fluid performance is extremely poor, it need to be replaced immediately !
 

After the completion of each test, please use the dry cloth or paper towel to wipe the fluid of the test point. 
1.This product support Ni-MH recharging batteries.
2.After finishing testing,please clean the probe in case the Retention of stains will affect usage next time.
3.If Unused for long periods, it is recommended to remove the battery, put the product stored at room temperature and dry place.